Eliminate Defects and Drastically Reduce Rework Rates.

Improving transfer efficiency (T.E.) is the fastest way to reduce costs and waste. The solution lies in your painting coating equipment. If you are using conventional air spray guns, upgrading to High-Volume, Low-Pressure (HVLP) or Air-Assisted Airless guns can significantly boost T.E. The next and most effective step is to implement electrostatic equipment. An electrostatic spray gun from a TIMS COATING system applies an electrical charge to the paint particles, which are then actively attracted to the grounded part. This "wraparound" effect dramatically increases the amount of paint that lands on the product, often boosting transfer efficiency from 30-40% to over 60-70% or even higher.

Industrial painting coating equipment is primarily categorized by the type of coating it applies. The main categories are: 1. Liquid Finishing Systems, which include equipment for conventional spray painting (guns, booths, pumps), electrostatic liquid painting for higher efficiency, and dip-coating methods like E-coating for total immersion. 2. Powder Coating Systems, which use electrostatic guns to apply a dry powder, which is then melted and fused in a curing oven. Each of these systems is a complete line that also includes critical pretreatment and curing equipment. TIMS COATING is an expert manufacturer of all types of painting coating equipment.

Reducing Volatile Organic Compound (VOC) emissions is a critical environmental and regulatory challenge. The most effective solution starts with your painting coating equipment and process. The first option is to switch to low-VOC or water-based paints, which may require modifications to your fluid handling system. The second, and often best, solution is to convert to a powder coating system, which uses a dry powder with zero VOCs. If you must use high-VOC paints, the final line of defense is to install an abatement system, such as a thermal oxidizer, at the exhaust of your painting coating equipment to destroy the VOCs before they are released into the atmosphere.

A paint spray booth is a critical piece of painting coating equipment that provides a safe, clean, and controlled environment for the application of liquid or powder coatings. Its primary function is safety: it contains hazardous overspray and fumes and exhausts them through a filtration system. Its second function is quality: downdraft or cross-draft airflow systems prevent airborne dust from settling on the wet parts, and proper lighting allows operators or robots to apply a perfect coat. A high-performance spray booth from TIMS COATING is an engineered environment that is essential for achieving a professional, defect-free finish.